• 3M Scotchcal 7125 ElectroCut Atomic Red cast sign vinyl color
  • 3M Scotchcal 7125 ElectroCut Atomic Red cast sign vinyl
  • 3M Scotchcal 7125 ElectroCut cast vinyl series features and professional sign applications
  • 3M Scotchcal 7125 ElectroCut cast vinyl series color and application reference
  • 3M 7125 Backing liner guide
  • 3M 7125 Striping roll size and cutting guide
  • 3M 7125 Custom-cut striping ordering and processing guide
3M Scotchcal 7125 ElectroCut Atomic Red cast sign vinyl color
3M Scotchcal 7125 ElectroCut Atomic Red cast sign vinyl
3M Scotchcal 7125 ElectroCut cast vinyl series features and professional sign applications
3M Scotchcal 7125 ElectroCut cast vinyl series color and application reference
3M 7125 Backing liner guide
3M 7125 Striping roll size and cutting guide
3M 7125 Custom-cut striping ordering and processing guide

All striping rolls take approximately 10–14 days to arrive, including a 5–7-day processing time. These rolls are custom cut and NON-REFUNDABLE.

3M Scotchcal ElectroCut 7125 atomic red vinyl striping is a nominal 2 mil cast film with clear permanent pressure-sensitive adhesive, converted into narrow rolls for decorative lines, borders, lettering and graphics. The paper liner provides familiar handling for cut lettering and prespaced graphics.

Material and liner

  • Series: 3M 7125.
  • Color reference: Atomic Red, FDC code 293.
  • Appearance: gloss.
  • Film: cast vinyl, nominal 2 mil without adhesive.
  • Adhesive: clear, permanent pressure-sensitive.
  • Liner: Kraft paper; blue paper on White 010 and Matte White 020, white paper on other colors.
  • Configuration: unpunched, custom-cut roll.

Uses and compatibility

Use for commercial and industrial lettering, emblems, labels, point-of-purchase displays, general signage, striping, vehicle markings and two-way window graphics. The film has the same color on both sides. Test adhesion, opacity and appearance on the intended surface; some colors are less opaque than others.

Follow 3M instructions for compatible flat surfaces, simple curves and riveted applications. Do not assume suitability for deep recesses, compound contours or a complete vehicle wrap.

Cutting, imaging and roll sizes

Designed for electronic cutting and prespaced graphics. Screen printing and compatible narrow-width thermal-transfer systems are supported; this is not general-purpose solvent, eco-solvent, latex or UV inkjet print media. Follow the current approved component and imaging instructions.

Select the required width and length from Size. Ten yards equals 30 feet; 50 yards equals 150 feet. The selected narrow width is supplied, not a full-width master roll. Confirm cutter minimum media width and pinch-roller support before ordering.

These unpunched rolls are for compatible friction-feed equipment. 7175 is the separate punched configuration for sprocket/pin-feed equipment; the two feed configurations are not interchangeable.

Application and care

Apply to clean, properly prepared compatible surfaces at or above 50°F, following the current 3M instructions. Wet or dry application may be used where appropriate. Test composites, plastics and painted surfaces before production. For cleaning, use a mild non-abrasive product suitable for the surface and test it first; avoid abrasive scrubbing.

Durability and storage

The supplier lists outdoor durability up to eight years for the series. Actual performance and warranty coverage vary with color, finish, geographic region, exposure, processing and the approved component system; transparent and metallic selections can have shorter ratings. This is not a blanket eight-year warranty. Store in the original packaging, clean and dry, and follow the applicable 3M shelf-life guidance.

Ordering and delivery

Allow approximately 10–14 days for arrival, including 5–7 days of processing. All striping rolls are custom cut and non-refundable. Confirm series, liner, color, finish, width, length and equipment compatibility before ordering.
🚚 $9.95 Flat Rate • FREE Ground Shipping $300+

3M

3M 7125 Scotchcal ElectroCut Vinyl Striping – Atomic Red

SKU 7125-1450-293
$7.95

All striping rolls take approximately 10–14 days to arrive, including a 5–7-day processing time. These rolls are custom cut and NON-REFUNDABLE.

3M Scotchcal ElectroCut 7125 atomic red vinyl striping is a nominal 2 mil cast film with clear permanent pressure-sensitive adhesive, converted into narrow rolls for decorative lines, borders, lettering and graphics. The paper liner provides familiar handling for cut lettering and prespaced graphics.

Material and liner

  • Series: 3M 7125.
  • Color reference: Atomic Red, FDC code 293.
  • Appearance: gloss.
  • Film: cast vinyl, nominal 2 mil without adhesive.
  • Adhesive: clear, permanent pressure-sensitive.
  • Liner: Kraft paper; blue paper on White 010 and Matte White 020, white paper on other colors.
  • Configuration: unpunched, custom-cut roll.

Uses and compatibility

Use for commercial and industrial lettering, emblems, labels, point-of-purchase displays, general signage, striping, vehicle markings and two-way window graphics. The film has the same color on both sides. Test adhesion, opacity and appearance on the intended surface; some colors are less opaque than others.

Follow 3M instructions for compatible flat surfaces, simple curves and riveted applications. Do not assume suitability for deep recesses, compound contours or a complete vehicle wrap.

Cutting, imaging and roll sizes

Designed for electronic cutting and prespaced graphics. Screen printing and compatible narrow-width thermal-transfer systems are supported; this is not general-purpose solvent, eco-solvent, latex or UV inkjet print media. Follow the current approved component and imaging instructions.

Select the required width and length from Size. Ten yards equals 30 feet; 50 yards equals 150 feet. The selected narrow width is supplied, not a full-width master roll. Confirm cutter minimum media width and pinch-roller support before ordering.

These unpunched rolls are for compatible friction-feed equipment. 7175 is the separate punched configuration for sprocket/pin-feed equipment; the two feed configurations are not interchangeable.

Application and care

Apply to clean, properly prepared compatible surfaces at or above 50°F, following the current 3M instructions. Wet or dry application may be used where appropriate. Test composites, plastics and painted surfaces before production. For cleaning, use a mild non-abrasive product suitable for the surface and test it first; avoid abrasive scrubbing.

Durability and storage

The supplier lists outdoor durability up to eight years for the series. Actual performance and warranty coverage vary with color, finish, geographic region, exposure, processing and the approved component system; transparent and metallic selections can have shorter ratings. This is not a blanket eight-year warranty. Store in the original packaging, clean and dry, and follow the applicable 3M shelf-life guidance.

Ordering and delivery

Allow approximately 10–14 days for arrival, including 5–7 days of processing. All striping rolls are custom cut and non-refundable. Confirm series, liner, color, finish, width, length and equipment compatibility before ordering.
$7.95
Size:

Not all products are available for pickup at our Reno/Sparks warehouse. Please email us before placing your order to confirm local stock availability and pickup arrangements.
3M Scotchcal 7125 ElectroCut Atomic Red cast sign vinyl color 3M Scotchcal 7125 ElectroCut Atomic Red cast sign vinyl 3M Scotchcal 7125 ElectroCut cast vinyl series features and professional sign applications 3M Scotchcal 7125 ElectroCut cast vinyl series color and application reference 3M 7125 Backing liner guide 3M 7125 Striping roll size and cutting guide 3M 7125 Custom-cut striping ordering and processing guide
3M Scotchcal 7125 ElectroCut Atomic Red cast sign vinyl color 3M Scotchcal 7125 ElectroCut Atomic Red cast sign vinyl 3M Scotchcal 7125 ElectroCut cast vinyl series features and professional sign applications 3M Scotchcal 7125 ElectroCut cast vinyl series color and application reference 3M 7125 Backing liner guide 3M 7125 Striping roll size and cutting guide 3M 7125 Custom-cut striping ordering and processing guide

  • 🏆 Serving Since 1930

    Over 90 years of industry experience

  • 🚚 Free Shipping

    Free ground shipping on eligible orders $300+.

     Excludes 3M DI-NOC and freight items.

  • 📞 Expert Support

    Call Scott: 775-382-2290

  • 🔒 Secure Checkout

    Protected Shopify checkout

Frequently Bought Together

Total price$151.80

Product Description

All striping rolls take approximately 10–14 days to arrive, including a 5–7-day processing time. These rolls are custom cut and NON-REFUNDABLE.

3M Scotchcal ElectroCut 7125 atomic red vinyl striping is a nominal 2 mil cast film with clear permanent pressure-sensitive adhesive, converted into narrow rolls for decorative lines, borders, lettering and graphics. The paper liner provides familiar handling for cut lettering and prespaced graphics.

Material and liner

  • Series: 3M 7125.
  • Color reference: Atomic Red, FDC code 293.
  • Appearance: gloss.
  • Film: cast vinyl, nominal 2 mil without adhesive.
  • Adhesive: clear, permanent pressure-sensitive.
  • Liner: Kraft paper; blue paper on White 010 and Matte White 020, white paper on other colors.
  • Configuration: unpunched, custom-cut roll.

Uses and compatibility

Use for commercial and industrial lettering, emblems, labels, point-of-purchase displays, general signage, striping, vehicle markings and two-way window graphics. The film has the same color on both sides. Test adhesion, opacity and appearance on the intended surface; some colors are less opaque than others.

Follow 3M instructions for compatible flat surfaces, simple curves and riveted applications. Do not assume suitability for deep recesses, compound contours or a complete vehicle wrap.

Cutting, imaging and roll sizes

Designed for electronic cutting and prespaced graphics. Screen printing and compatible narrow-width thermal-transfer systems are supported; this is not general-purpose solvent, eco-solvent, latex or UV inkjet print media. Follow the current approved component and imaging instructions.

Select the required width and length from Size. Ten yards equals 30 feet; 50 yards equals 150 feet. The selected narrow width is supplied, not a full-width master roll. Confirm cutter minimum media width and pinch-roller support before ordering.

These unpunched rolls are for compatible friction-feed equipment. 7175 is the separate punched configuration for sprocket/pin-feed equipment; the two feed configurations are not interchangeable.

Application and care

Apply to clean, properly prepared compatible surfaces at or above 50°F, following the current 3M instructions. Wet or dry application may be used where appropriate. Test composites, plastics and painted surfaces before production. For cleaning, use a mild non-abrasive product suitable for the surface and test it first; avoid abrasive scrubbing.

Durability and storage

The supplier lists outdoor durability up to eight years for the series. Actual performance and warranty coverage vary with color, finish, geographic region, exposure, processing and the approved component system; transparent and metallic selections can have shorter ratings. This is not a blanket eight-year warranty. Store in the original packaging, clean and dry, and follow the applicable 3M shelf-life guidance.

Ordering and delivery

Allow approximately 10–14 days for arrival, including 5–7 days of processing. All striping rolls are custom cut and non-refundable. Confirm series, liner, color, finish, width, length and equipment compatibility before ordering.

Similar Products

Customers also bought

    Complementary products