Stahls - UltraWeed

Achieve ultimate results with this easy-to-weed material

UltraWeed™ is the go-to material you need for everyday heat printing projects. With smooth cutting on any vinyl cutter, effortless weeding, and low temp application, it’s guaranteed to give you the ultimate, worry-free application from start to finish.
All roll widths are approximate.
  • Clear carrier for accurate placement
  • Scorch-free application
  • Matte-finish & soft feel
  • Made in the USA*
*Due to COVID-related supply issues, some colors are currently manufactured outside the U.S.

 Material Specifications

  • Composition: Polyurethane (PU)
  • Carrier: High-Tack, Clear
  • Thickness: 90-100 microns (.09-.1mm)
  • Washability: 50
  • Safety: CPSIA Certified
  • Laser cutter compatible

 1-Color Application Instructions

Time: - 12 seconds
Temperature: - 260-300°F
Pressure: - Medium
Peel: - Hot

 2-Color Application Instructions

Time: - Press background layer for 2-3 seconds, place foreground layer for full application of 12 seconds
Temperature: - 260-300°F
Pressure: - Medium
Peel: - Hot

Hotronix® 360 IQ™ Hat Press

Time: 45 seconds
Upper: 280°F
Lower: 320°F
Pressure: Medium
Peel: Warm/Cold
Cover Sheet: 1/8" Foam Pad

 Special Notes

If the garment is 50% or more cotton it will require 280°F + degrees.

 Care Instructions

Machine wash inside-out using mild detergent.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.


Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.

 Material/Fabric Compatibility

  • 100% Cotton
  • 100% Polyester
  • Cotton/Poly Blends
  • Lycra®/Spandex Blends