Siser® EasyWeed® Fluorescent Pink heat transfer vinyl is a 3.5 mil polyurethane film with a semi-matte finish for cut designs on compatible cotton, polyester and cotton/polyester blends. This listing is dedicated to Fluorescent Pink, FDC color code 019, in the roll sizes and feed formats shown below.

Choose Fluorescent Pink for personalized shirts, decorative lettering and coordinated apparel designs that call for this bright pink shade.

Fluorescent color with EasyWeed handling

EasyWeed combines a pressure-sensitive polyester carrier with a clear, permanent heat-activated adhesive. The carrier helps keep detailed lettering and small design elements in position during weeding. Its layerable construction supports multicolor apparel decoration, with a short tack step for positioning layers before the final press.

• Fluorescent Pink fluorescent color with a semi-matte surface.
• Polyurethane film, approximately 90 microns / 3.5 mil thick.
• Cuttable material for names, lettering, logos and decorative shapes.
• Pressure-sensitive PET carrier for cutting, weeding and placement.
• Heat application with either a hot or cold carrier peel.

Fluorescent Pink roll sizes

• 15-inch unpunched rolls: 5, 10, 25 and 50 yards.
• 20-inch unpunched rolls: 5, 10, 25 and 50 yards.
• 15-inch punched rolls: 5, 10, 25 and 50 yards.

Roll lengths correspond to 15, 30, 75 and 150 feet. Select Width, Length and Feed Type to order one complete roll configuration. Only the listed combinations are offered.

Punched and unpunched feed types

Unpunched rolls use FDC series 9016 and are intended for compatible friction-feed cutting equipment. Punched rolls use FDC series 9066 and have edge feed holes for compatible sprocket-feed or pin-feed equipment. These formats are not interchangeable. Match both roll width and feed type to your cutter.

Suitable fabrics and applications

Decorate compatible untreated cotton, polyester and cotton/polyester blends with custom apparel designs. Test adhesion and appearance on the actual garment before production. The FDC-linked EasyWeed technical guidance excludes treated fabrics and dye-sublimated textiles. This material is intended for cut graphics, rather than printing directly onto the film.

Heat-press application instructions

1. Mirror the design and load the film carrier side down. Perform a test cut using settings appropriate for the cutter, blade and material.
2. Weed the excess film, leaving the cut graphic on its carrier.
3. Preheat the garment for 2–3 seconds.
4. Position the design and cover it with a heat-transfer cover sheet or multipurpose paper.
5. Following Siser North America's EasyWeed guidance, press at 305°F / 150°C for 10–15 seconds with medium pressure.
6. Peel the carrier hot or cold. If an edge lifts, cover and re-press for 5–10 seconds.

Wash and care

Wait at least 24 hours before the first wash. Machine wash cold with mild detergent. Siser permits a normal dryer setting; follow the garment's care requirements as well. Do not dry clean. Liquid fabric softener is not recommended.

Color selection questions

Will fluorescent colors match between orders?

Siser notes that fluorescent colors can vary from batch to batch because of their manufacturing process. Plan matching garments together when consistent color across a project matters. Screen displays are color references and do not establish an exact physical color match.

Can I layer this color?

EasyWeed Fluorescent supports layering. Follow Siser's complete layering instructions for the materials used, including the short tack step and final application.

Is this EasyWeed Glow?

No. This listing is for the named fluorescent EasyWeed color. EasyWeed Glow is a separate Siser product.

Choose Siser EasyWeed Fluorescent Pink for cuttable, layerable apparel decoration in this specific fluorescent shade. Review the selected roll configuration before ordering; cut products and special orders may be non-returnable under CrafterNV's return policy.