-
files/Batch34V2_Siser_TTD_Mask_shared_01_roll_06ad703a-b985-4629-83e1-f00ab2350c14.jpg
-
files/Batch34V2_Siser_TTD_Mask_shared_02_roll_detail_482bd797-b986-4822-b487-7a727fe3c007.jpg
-
files/Batch34V2_Siser_TTD_Mask_shared_03_roll_squeegee_fba502cb-6037-4a63-ac7f-cb6d443da658.jpg
-
files/Batch34Extra_shared_04_masking_application_AI_297679a4-7c3b-42da-9bba-b9622ff2fe58.jpg
-
files/Batch34Extra_shared_05_liner_removal_AI_43a266f8-bcbc-4628-80bf-36d36359de4e.jpg
-
files/Batch34Extra_shared_06_heat_press_application_AI_8b65e3e9-c94c-423c-884c-214fd9400261.jpg
Siser® TTD Easy Mask is a clear polyester transfer mask used to lift, position and heat apply compatible printable heat transfer graphics. After a design has been printed, contour cut and weeded, the mask keeps the separate pieces aligned as you move them from the original liner onto the garment. The transparent face helps you see the artwork and placement area.
Made for printable heat transfer media
TTD Easy Mask is an application accessory, not the printable decoration itself. FDC pairs it with Siser ColorPrint Easy, and Siser also recommends it for ColorPrint Extra PU. Check the specific printable media’s instructions to confirm the appropriate mask. Printable HTV, garments, squeegees and press cover sheets are sold separately.
Available roll
- Clear transfer mask.
- 54 in × 50 yd roll — 150 linear feet.
- Supplier SKU / MPN 9310-5415-000.
- Polyester construction, as specified by FDC.
This listing includes one roll in the configuration shown. Cut the mask to the size needed for the weeded design. Confirm that its working width covers the complete graphic you intend to lift.
How to use TTD Easy Mask
- Print, contour cut and weed the compatible printable HTV.
- Place the mask over the graphic and burnish evenly with an appropriate squeegee.
- Separate the original media liner while keeping the graphic aligned on the mask.
- Position the masked transfer on the garment.
- Use the printable HTV manufacturer’s specified temperature, pressure, application time, cover sheet and peel procedure.
Test masking and release with the actual media and artwork before a production run. This mask does not set a universal heat-press temperature; the printable film determines the application settings.
Choosing between Easy Mask and High Tack Mask
Easy Mask is the companion transfer mask identified for ColorPrint Easy. TTD High Tack Mask provides additional grip for suitable media and designs that need it. Use the printable media’s recommendation rather than assuming the two tack levels are interchangeable for every application.
Frequently asked questions
Can I print directly onto this roll?
No. Print onto compatible printable HTV, then use the mask to move the weeded graphic.
Is this ordinary sign-vinyl application tape?
No. Siser designs TTD masks for heat-transfer workflows. Standard sign-vinyl tape may release poorly or leave residue during heat application.
Does the clear mask stay on the finished garment?
No. Remove it at the peel stage specified for the printable media.
Is a squeegee included?
No. Tools in manufacturer or application photos illustrate the workflow and are sold separately.
Siser® TTD Easy Mask is a clear polyester transfer mask used to lift, position and heat apply compatible printable heat transfer graphics. After a design has been printed, contour cut and weeded, the mask keeps the separate pieces aligned as you move them from the original liner onto the garment. The transparent face helps you see the artwork and placement area.
Made for printable heat transfer media
TTD Easy Mask is an application accessory, not the printable decoration itself. FDC pairs it with Siser ColorPrint Easy, and Siser also recommends it for ColorPrint Extra PU. Check the specific printable media’s instructions to confirm the appropriate mask. Printable HTV, garments, squeegees and press cover sheets are sold separately.
Available roll
- Clear transfer mask.
- 54 in × 50 yd roll — 150 linear feet.
- Supplier SKU / MPN 9310-5415-000.
- Polyester construction, as specified by FDC.
This listing includes one roll in the configuration shown. Cut the mask to the size needed for the weeded design. Confirm that its working width covers the complete graphic you intend to lift.
How to use TTD Easy Mask
- Print, contour cut and weed the compatible printable HTV.
- Place the mask over the graphic and burnish evenly with an appropriate squeegee.
- Separate the original media liner while keeping the graphic aligned on the mask.
- Position the masked transfer on the garment.
- Use the printable HTV manufacturer’s specified temperature, pressure, application time, cover sheet and peel procedure.
Test masking and release with the actual media and artwork before a production run. This mask does not set a universal heat-press temperature; the printable film determines the application settings.
Choosing between Easy Mask and High Tack Mask
Easy Mask is the companion transfer mask identified for ColorPrint Easy. TTD High Tack Mask provides additional grip for suitable media and designs that need it. Use the printable media’s recommendation rather than assuming the two tack levels are interchangeable for every application.
Frequently asked questions
Can I print directly onto this roll?
No. Print onto compatible printable HTV, then use the mask to move the weeded graphic.
Is this ordinary sign-vinyl application tape?
No. Siser designs TTD masks for heat-transfer workflows. Standard sign-vinyl tape may release poorly or leave residue during heat application.
Does the clear mask stay on the finished garment?
No. Remove it at the peel stage specified for the printable media.
Is a squeegee included?
No. Tools in manufacturer or application photos illustrate the workflow and are sold separately.
- Regular price
- $403.95
Not all products are available for pickup at our Reno/Sparks warehouse. Please email us before placing your order to confirm local stock availability and pickup arrangements.
