Arlon DPF 510G/M – 3.2 mil Promotional Printable Vinyl, Clear Permanent Adhesive

Arlon DPF 510G/M is a 3.2-mil calendered promotional printable vinyl for economical short-term signs and displays. It uses a clear solvent-based permanent adhesive and a two-sided lay-flat polycoated liner designed for consistent printer handling.

Verified Technical Specifications

• 3.2-mil (80 micron) calendered film
• Gloss or matte white finish depending on construction
• Clear permanent solvent-based pressure-sensitive adhesive
• Two-sided lay-flat polycoated liner
• Up to 3 years unprinted outdoor durability
• Eco-solvent, solvent, UV and latex ink compatibility

Common Applications

• Permanent standard signage
• Display and promotional graphics
• Kiosks and POP displays
• Real-estate signage
• Interior or exterior flat-surface graphics

Current CrafterNV Configuration

Gloss, Matte, 54" x 50yds or 150ft, 60" x 50yds or 150ft - Limited Stock

Choosing the Right Arlon Film

Choose DPF 510G/M when you need an economical promotional film with clear permanent adhesive and do not need an air-egress liner. For air-egress installation and added hiding power, DPF 510GTX/MTX is the closer alternative.

Printing & Installation Guidance

Use a current media profile appropriate for the printer and ink system. Allow solvent or eco-solvent prints to outgas as required before lamination. Clean and test the actual substrate before production; paint chemistry, surface energy, texture, contamination and environmental conditions can materially affect adhesion. Pair the graphic with an Arlon overlaminate appropriate to the film and application when added abrasion, UV or surface protection is required.

Frequently Asked Questions

What does X-Scape Technology do?
Arlon's X-Scape liner provides air-egress channels that help trapped air escape during installation, reducing bubbles and improving installation efficiency on appropriate surfaces.

Are DPF 510 and DPF 4500 interchangeable?
No. DPF 510 is a promotional 3-year family, while DPF 4500GLX/MLX is an intermediate 5-year film. Adhesive color, liner technology and intended service life should be matched to the job.

Should rough-wall graphics be tested first?
Yes. Brick, concrete, tile, painted walls and low-surface-energy materials vary substantially. Test adhesion and removal behavior on the actual surface before a full installation.