• 3M 3930 Blue reflective sheeting color reference; custom-cut striping supplied in selected width and length
  • 3M 3930 High Intensity Prismatic reflective sheeting manufacturer family photo; colors and roll widths shown vary from selected item
  • 3M manufacturer example of High Intensity Prismatic reflective sheeting used for traffic signs; sign not included
  • 3M 3930 custom-cut striping size guide; 10 yards equals 30 feet and 50 yards equals 150 feet; yellow 0515 is 4-1/2 inches wide
  • 3M 3930 application guide for flat sign substrates; apply dry at 65 degrees Fahrenheit or above using approved methods
  • 3M 3930 custom-cut striping ordering guide; unpunched rolls, 10 to 14 day arrival estimate, custom cut and non-refundable
3M 3930 Blue reflective sheeting color reference; custom-cut striping supplied in selected width and length
3M 3930 High Intensity Prismatic reflective sheeting manufacturer family photo; colors and roll widths shown vary from selected item
3M manufacturer example of High Intensity Prismatic reflective sheeting used for traffic signs; sign not included
3M 3930 custom-cut striping size guide; 10 yards equals 30 feet and 50 yards equals 150 feet; yellow 0515 is 4-1/2 inches wide
3M 3930 application guide for flat sign substrates; apply dry at 65 degrees Fahrenheit or above using approved methods
3M 3930 custom-cut striping ordering guide; unpunched rolls, 10 to 14 day arrival estimate, custom cut and non-refundable

All striping rolls take approximately 10–14 days to arrive, including a 5–7-day processing time. These rolls are custom cut and NON-REFUNDABLE.

3M Series 3930 High Intensity Prismatic reflective striping in blue is custom-cut sign sheeting for reflective borders, lines and details on properly prepared flat sign substrates. Its microprismatic construction returns light toward its source for nighttime visibility.

Features and applications

  • High Intensity Prismatic sheeting for traffic-control signs, guidance signs, work-zone devices and delineators exposed vertically in service.
  • Series 3930 meets ASTM D4956 Type III and Type IV sheeting requirements. Finished signs must satisfy the governing project specification.
  • Pressure-sensitive permanent adhesive and a gloss finish.

Specifications

  • Series: 3M 3930, supplied through FDC.
  • Color: Blue; FDC color code 035.
  • Construction: non-metalized microprismatic reflective sheeting.
  • Nominal thickness: 17 mil, as listed by FDC.
  • Liner: paper.
  • Surface: primarily flat sign substrates.
  • Application: dry, at or above 65°F (18°C).
  • Format: unpunched, custom-cut roll.

Selecting a roll

Widths range from 1/4 inch to 12 inches; available lengths vary by width. Select the required width and length from Size. Ten yards equals 30 feet; 50 yards equals 150 feet. These are narrow converted rolls, rather than full-width master rolls.

3930 is unpunched. FDC 3980 is the separate punched version for compatible sprocket/pin-feed equipment. Punched and unpunched configurations are not interchangeable. Confirm cutter capability and minimum media width before ordering.

Processing and installation

Follow current 3M substrate preparation and application instructions. Background and complete sign applications require a mechanical or hand-driven roll laminator. The current 3M bulletin identifies flat-bed plotters as the most consistent cutting method, and permits hand cutting and single-sheet die cutting. Do not assume a standard roll-fed vinyl cutter can process this sheeting.

Imaging is limited to approved 3M matched-component systems. Qualified latex imaging requires the specified protective film; screen processing requires the specified 3M process colors. Confirm the complete system before production.

Service life and care

FDC lists outdoor durability up to 10 years. Actual service life and warranty coverage depend on color, exposure, fabrication and the approved component system; this is not a blanket warranty for converted striping. Follow 3M cleaning guidance and inspect installed signs regularly. Do not use this rigid sign sheeting as vehicle-wrap film.

Ordering and delivery

Allow approximately 10–14 days for arrival, including 5–7 days of processing. All striping rolls are custom cut and non-refundable. Verify color, width, length, equipment and substrate compatibility before ordering.
🚚 $9.95 Flat Rate • FREE Ground Shipping $300+

3M

3M 3930 High Intensity Prismatic Reflective Striping – Blue

SKU 3930-1450-035
$11.95

All striping rolls take approximately 10–14 days to arrive, including a 5–7-day processing time. These rolls are custom cut and NON-REFUNDABLE.

3M Series 3930 High Intensity Prismatic reflective striping in blue is custom-cut sign sheeting for reflective borders, lines and details on properly prepared flat sign substrates. Its microprismatic construction returns light toward its source for nighttime visibility.

Features and applications

  • High Intensity Prismatic sheeting for traffic-control signs, guidance signs, work-zone devices and delineators exposed vertically in service.
  • Series 3930 meets ASTM D4956 Type III and Type IV sheeting requirements. Finished signs must satisfy the governing project specification.
  • Pressure-sensitive permanent adhesive and a gloss finish.

Specifications

  • Series: 3M 3930, supplied through FDC.
  • Color: Blue; FDC color code 035.
  • Construction: non-metalized microprismatic reflective sheeting.
  • Nominal thickness: 17 mil, as listed by FDC.
  • Liner: paper.
  • Surface: primarily flat sign substrates.
  • Application: dry, at or above 65°F (18°C).
  • Format: unpunched, custom-cut roll.

Selecting a roll

Widths range from 1/4 inch to 12 inches; available lengths vary by width. Select the required width and length from Size. Ten yards equals 30 feet; 50 yards equals 150 feet. These are narrow converted rolls, rather than full-width master rolls.

3930 is unpunched. FDC 3980 is the separate punched version for compatible sprocket/pin-feed equipment. Punched and unpunched configurations are not interchangeable. Confirm cutter capability and minimum media width before ordering.

Processing and installation

Follow current 3M substrate preparation and application instructions. Background and complete sign applications require a mechanical or hand-driven roll laminator. The current 3M bulletin identifies flat-bed plotters as the most consistent cutting method, and permits hand cutting and single-sheet die cutting. Do not assume a standard roll-fed vinyl cutter can process this sheeting.

Imaging is limited to approved 3M matched-component systems. Qualified latex imaging requires the specified protective film; screen processing requires the specified 3M process colors. Confirm the complete system before production.

Service life and care

FDC lists outdoor durability up to 10 years. Actual service life and warranty coverage depend on color, exposure, fabrication and the approved component system; this is not a blanket warranty for converted striping. Follow 3M cleaning guidance and inspect installed signs regularly. Do not use this rigid sign sheeting as vehicle-wrap film.

Ordering and delivery

Allow approximately 10–14 days for arrival, including 5–7 days of processing. All striping rolls are custom cut and non-refundable. Verify color, width, length, equipment and substrate compatibility before ordering.
$11.95
Size:

Not all products are available for pickup at our Reno/Sparks warehouse. Please email us before placing your order to confirm local stock availability and pickup arrangements.
3M 3930 Blue reflective sheeting color reference; custom-cut striping supplied in selected width and length 3M 3930 High Intensity Prismatic reflective sheeting manufacturer family photo; colors and roll widths shown vary from selected item 3M manufacturer example of High Intensity Prismatic reflective sheeting used for traffic signs; sign not included 3M 3930 custom-cut striping size guide; 10 yards equals 30 feet and 50 yards equals 150 feet; yellow 0515 is 4-1/2 inches wide 3M 3930 application guide for flat sign substrates; apply dry at 65 degrees Fahrenheit or above using approved methods 3M 3930 custom-cut striping ordering guide; unpunched rolls, 10 to 14 day arrival estimate, custom cut and non-refundable
3M 3930 Blue reflective sheeting color reference; custom-cut striping supplied in selected width and length 3M 3930 High Intensity Prismatic reflective sheeting manufacturer family photo; colors and roll widths shown vary from selected item 3M manufacturer example of High Intensity Prismatic reflective sheeting used for traffic signs; sign not included 3M 3930 custom-cut striping size guide; 10 yards equals 30 feet and 50 yards equals 150 feet; yellow 0515 is 4-1/2 inches wide 3M 3930 application guide for flat sign substrates; apply dry at 65 degrees Fahrenheit or above using approved methods 3M 3930 custom-cut striping ordering guide; unpunched rolls, 10 to 14 day arrival estimate, custom cut and non-refundable

  • 🏆 Serving Since 1930

    Over 90 years of industry experience

  • 🚚 Free Shipping

    Free ground shipping on eligible orders $300+.

     Excludes 3M DI-NOC and freight items.

  • 📞 Expert Support

    Call Scott: 775-382-2290

  • 🔒 Secure Checkout

    Protected Shopify checkout

Frequently Bought Together

Total price$59.75

Product Description

All striping rolls take approximately 10–14 days to arrive, including a 5–7-day processing time. These rolls are custom cut and NON-REFUNDABLE.

3M Series 3930 High Intensity Prismatic reflective striping in blue is custom-cut sign sheeting for reflective borders, lines and details on properly prepared flat sign substrates. Its microprismatic construction returns light toward its source for nighttime visibility.

Features and applications

  • High Intensity Prismatic sheeting for traffic-control signs, guidance signs, work-zone devices and delineators exposed vertically in service.
  • Series 3930 meets ASTM D4956 Type III and Type IV sheeting requirements. Finished signs must satisfy the governing project specification.
  • Pressure-sensitive permanent adhesive and a gloss finish.

Specifications

  • Series: 3M 3930, supplied through FDC.
  • Color: Blue; FDC color code 035.
  • Construction: non-metalized microprismatic reflective sheeting.
  • Nominal thickness: 17 mil, as listed by FDC.
  • Liner: paper.
  • Surface: primarily flat sign substrates.
  • Application: dry, at or above 65°F (18°C).
  • Format: unpunched, custom-cut roll.

Selecting a roll

Widths range from 1/4 inch to 12 inches; available lengths vary by width. Select the required width and length from Size. Ten yards equals 30 feet; 50 yards equals 150 feet. These are narrow converted rolls, rather than full-width master rolls.

3930 is unpunched. FDC 3980 is the separate punched version for compatible sprocket/pin-feed equipment. Punched and unpunched configurations are not interchangeable. Confirm cutter capability and minimum media width before ordering.

Processing and installation

Follow current 3M substrate preparation and application instructions. Background and complete sign applications require a mechanical or hand-driven roll laminator. The current 3M bulletin identifies flat-bed plotters as the most consistent cutting method, and permits hand cutting and single-sheet die cutting. Do not assume a standard roll-fed vinyl cutter can process this sheeting.

Imaging is limited to approved 3M matched-component systems. Qualified latex imaging requires the specified protective film; screen processing requires the specified 3M process colors. Confirm the complete system before production.

Service life and care

FDC lists outdoor durability up to 10 years. Actual service life and warranty coverage depend on color, exposure, fabrication and the approved component system; this is not a blanket warranty for converted striping. Follow 3M cleaning guidance and inspect installed signs regularly. Do not use this rigid sign sheeting as vehicle-wrap film.

Ordering and delivery

Allow approximately 10–14 days for arrival, including 5–7 days of processing. All striping rolls are custom cut and non-refundable. Verify color, width, length, equipment and substrate compatibility before ordering.

Similar Products

Customers also bought

    Complementary products