You need to choose options for product.
-
files/1119202601_3m-7125-211-charcoal-metallic-color-reference_99c2a13c-ae2f-4881-9701-870a1b69c902.jpg
-
files/1119202601_3m-7125-211-charcoal-metallic-crafternv-gallery_4b6647c6-689d-4c7a-9757-7268ebf7052c.jpg
-
files/1119202601_crafternv-metallic-vinyl-assortment-gallery_e9c96d95-e349-424a-99ec-55e6a51800a7.jpg
3M Scotchcal ElectroCut Charcoal Metallic (211) is a 2 mil opaque cast sign vinyl for cut lettering, permanent decals, and commercial graphics. Choose a 7125 unpunched roll for compatible friction-feed cutters or a 7175 punched roll for compatible sprocket-feed equipment. Both roll styles are available in 10 and 50 yard lengths.
Where to use Charcoal Metallic
For storefront lettering, charcoal gives a dark neutral accent. Compare it with black and Slate Metallic against the actual sign face, particularly when the design uses small type.
The thin cast film follows flat surfaces with or without rivets and simple curves. Its clear, permanent pressure-sensitive adhesive is designed for long-term graphics on suitable surfaces, including finished sign panels, painted vehicle panels, and glass.
Available roll sizes
- 7125 unpunched: 15, 24, 30, and 48 inches wide, each in 10 or 50 yards.
- 7175 punched: 15 and 30 inches wide, each in 10 or 50 yards.
Confirm your cutter’s feed system and usable cutting width before ordering. Choose a 10 yard roll for shorter jobs or a 50 yard roll for production runs.
Technical specifications
- Film: 2 mil (50 micron) opaque cast vinyl, color code 211.
- Finish: Gloss metallic.
- Adhesive: Clear, permanent, pressure-sensitive.
- Liner: Kraft paper.
- Processing: Electronic cutting, compatible screen printing, and narrow-width thermal transfer.
- Expected outdoor life: 3M cites eight years for unprinted, unprotected film on a flat, vertical outdoor surface under its bulletin conditions. Actual life depends on the substrate, installation and exposure.
Cutting and installation
- Make a test cut and adjust blade depth and pressure so the blade cuts the film cleanly while leaving the liner intact.
- Weed the design and use a compatible application tape to transfer lettering or grouped graphics.
- Clean and dry the substrate before application. On flat surfaces with or without rivets, 3M specifies an air and substrate temperature of 50–100°F (10–38°C). Follow 3M’s wet or dry application instructions for your surface.
For tone-on-tone graphics, check the lettering from normal viewing distance before cutting the full set.
Frequently asked questions
Can I use this with an inkjet printer?
Choose this film for cut graphics, compatible screen printing, or narrow-width thermal transfer. If your workflow uses eco-solvent, latex, or UV inkjet, choose a film specified for that printer and ink.
Can I use Charcoal Metallic for temporary decals?
The adhesive is permanent. For temporary graphics, choose a film rated for the surface and the planned removal interval.
How do I confirm the color?
Use the gallery for a general color reference. Metallic appearance and color can vary with lighting, viewing angle, and screen settings. Compare a physical sample when the job requires a close match.
Browse high-performance vinyl or sign vinyl and graphic films. For installation details, see the 3M 7125 product bulletin.
- Regular price
- $68.95
3M Scotchcal ElectroCut Charcoal Metallic (211) is a 2 mil opaque cast sign vinyl for cut lettering, permanent decals, and commercial graphics. Choose a 7125 unpunched roll for compatible friction-feed cutters or a 7175 punched roll for compatible sprocket-feed equipment. Both roll styles are available in 10 and 50 yard lengths.
Where to use Charcoal Metallic
For storefront lettering, charcoal gives a dark neutral accent. Compare it with black and Slate Metallic against the actual sign face, particularly when the design uses small type.
The thin cast film follows flat surfaces with or without rivets and simple curves. Its clear, permanent pressure-sensitive adhesive is designed for long-term graphics on suitable surfaces, including finished sign panels, painted vehicle panels, and glass.
Available roll sizes
- 7125 unpunched: 15, 24, 30, and 48 inches wide, each in 10 or 50 yards.
- 7175 punched: 15 and 30 inches wide, each in 10 or 50 yards.
Confirm your cutter’s feed system and usable cutting width before ordering. Choose a 10 yard roll for shorter jobs or a 50 yard roll for production runs.
Technical specifications
- Film: 2 mil (50 micron) opaque cast vinyl, color code 211.
- Finish: Gloss metallic.
- Adhesive: Clear, permanent, pressure-sensitive.
- Liner: Kraft paper.
- Processing: Electronic cutting, compatible screen printing, and narrow-width thermal transfer.
- Expected outdoor life: 3M cites eight years for unprinted, unprotected film on a flat, vertical outdoor surface under its bulletin conditions. Actual life depends on the substrate, installation and exposure.
Cutting and installation
- Make a test cut and adjust blade depth and pressure so the blade cuts the film cleanly while leaving the liner intact.
- Weed the design and use a compatible application tape to transfer lettering or grouped graphics.
- Clean and dry the substrate before application. On flat surfaces with or without rivets, 3M specifies an air and substrate temperature of 50–100°F (10–38°C). Follow 3M’s wet or dry application instructions for your surface.
For tone-on-tone graphics, check the lettering from normal viewing distance before cutting the full set.
Frequently asked questions
Can I use this with an inkjet printer?
Choose this film for cut graphics, compatible screen printing, or narrow-width thermal transfer. If your workflow uses eco-solvent, latex, or UV inkjet, choose a film specified for that printer and ink.
Can I use Charcoal Metallic for temporary decals?
The adhesive is permanent. For temporary graphics, choose a film rated for the surface and the planned removal interval.
How do I confirm the color?
Use the gallery for a general color reference. Metallic appearance and color can vary with lighting, viewing angle, and screen settings. Compare a physical sample when the job requires a close match.
Browse high-performance vinyl or sign vinyl and graphic films. For installation details, see the 3M 7125 product bulletin.
- Regular price
- $68.95
-
🏆 Serving Since 1930
Over 90 years of industry experience
-
🚚 Free Shipping
Free ground shipping on eligible orders $300+.
Excludes freight items.
-
📞 Expert Support
Call Scott: 775-382-2290
-
🔒 Secure Checkout
Protected Shopify checkout
Frequently Bought Together
-
3M™ Scotchcal™ Series 50 Intermediate Vinyl – Matte Black 120
Regular price From $32.95 -
Lumina by FDC 4200 Intermediate Ultra-High Gloss Vinyl – Black
Regular price From $25.95 -
Avery Dennison SW900 Supreme Wrapping Film Sample Swatch Deck
Regular price $50.00 -
Lumina by FDC 4200 Intermediate Matte Vinyl – White
Regular price From $25.95
Product Description
3M Scotchcal ElectroCut Charcoal Metallic (211) is a 2 mil opaque cast sign vinyl for cut lettering, permanent decals, and commercial graphics. Choose a 7125 unpunched roll for compatible friction-feed cutters or a 7175 punched roll for compatible sprocket-feed equipment. Both roll styles are available in 10 and 50 yard lengths.
Where to use Charcoal Metallic
For storefront lettering, charcoal gives a dark neutral accent. Compare it with black and Slate Metallic against the actual sign face, particularly when the design uses small type.
The thin cast film follows flat surfaces with or without rivets and simple curves. Its clear, permanent pressure-sensitive adhesive is designed for long-term graphics on suitable surfaces, including finished sign panels, painted vehicle panels, and glass.
Available roll sizes
- 7125 unpunched: 15, 24, 30, and 48 inches wide, each in 10 or 50 yards.
- 7175 punched: 15 and 30 inches wide, each in 10 or 50 yards.
Confirm your cutter’s feed system and usable cutting width before ordering. Choose a 10 yard roll for shorter jobs or a 50 yard roll for production runs.
Technical specifications
- Film: 2 mil (50 micron) opaque cast vinyl, color code 211.
- Finish: Gloss metallic.
- Adhesive: Clear, permanent, pressure-sensitive.
- Liner: Kraft paper.
- Processing: Electronic cutting, compatible screen printing, and narrow-width thermal transfer.
- Expected outdoor life: 3M cites eight years for unprinted, unprotected film on a flat, vertical outdoor surface under its bulletin conditions. Actual life depends on the substrate, installation and exposure.
Cutting and installation
- Make a test cut and adjust blade depth and pressure so the blade cuts the film cleanly while leaving the liner intact.
- Weed the design and use a compatible application tape to transfer lettering or grouped graphics.
- Clean and dry the substrate before application. On flat surfaces with or without rivets, 3M specifies an air and substrate temperature of 50–100°F (10–38°C). Follow 3M’s wet or dry application instructions for your surface.
For tone-on-tone graphics, check the lettering from normal viewing distance before cutting the full set.
Frequently asked questions
Can I use this with an inkjet printer?
Choose this film for cut graphics, compatible screen printing, or narrow-width thermal transfer. If your workflow uses eco-solvent, latex, or UV inkjet, choose a film specified for that printer and ink.
Can I use Charcoal Metallic for temporary decals?
The adhesive is permanent. For temporary graphics, choose a film rated for the surface and the planned removal interval.
How do I confirm the color?
Use the gallery for a general color reference. Metallic appearance and color can vary with lighting, viewing angle, and screen settings. Compare a physical sample when the job requires a close match.
Browse high-performance vinyl or sign vinyl and graphic films. For installation details, see the 3M 7125 product bulletin.
Similar Products
-
3M™ Scotchcal™ Series 50 Intermediate Vinyl – Matte Black 120
Regular price From $32.95 -
Lumina by FDC 4200 Intermediate Ultra-High Gloss Vinyl – Black
Regular price From $25.95 -
Avery Dennison SW900 Supreme Wrapping Film Sample Swatch Deck
Regular price $50.00 -
Lumina by FDC 4200 Intermediate Matte Vinyl – White
Regular price From $25.95