Lumina® by FDC 3521 / 3571 Fluorescent Cast Sign Vinyl

Create attention-grabbing short-term signage and graphics with Lumina® by FDC promotional fluorescent vinyl. This 2.3-mil cast film delivers vivid fluorescent color for retail windows, point-of-purchase displays, trade shows, accent striping, cut lettering and decals. Choose 3521 unpunched for compatible friction-feed cutters or 3571 punched for compatible sprocket/pin-feed cutters.

Manufacturer Specifications

• Film: 2.3-mil cast fluorescent vinyl; gloss finish
• Adhesive: Permanent acrylic, white
• Liner: 78 lb kraft paper
• Outdoor durability: Approximately 3–6 months; fluorescent pigments fade under UV exposure
• Recommended environment: Primarily interior or limited exterior use
• Minimum application temperature: 40°F
• Application: Wet application supported; check substrate suitability
• Conformability: Simple curves and appropriate corrugated/flat surfaces
• Shelf life: 1 year under recommended storage conditions
• Processing: Computer cutting, steel-rule cutting, thermal die-cutting, flatbed cutting, sheeting and cold lamination
• Not rated for: Solvent, eco-solvent, latex or UV inkjet printing; thermal-transfer and screen printing are not indicated by FDC for this film

Available Colors

Blue (005), Yellow (006), Orange (009), Red (056), Green (069) and Pink (076). Monitor colors and digital swatches are approximate; request a physical sample when precise color matching matters.

Punched vs. Unpunched: Select the Correct Configuration

3521 unpunched: Select from the existing offered roll widths and lengths for compatible friction-feed plotters. 3571 punched: FDC lists 15-inch and 30-inch widths, each in 10-yard and 50-yard lengths, for compatible pin-feed/sprocket-feed equipment. Punched and unpunched material are not interchangeable. Check your machine's feed system and the exact variant before ordering. Punched orders may require additional processing time.

Choosing Fluorescent Film

Ideal for temporary promotional displays, windshield graphics, accent stripes and other high-visibility graphics where short-term fluorescent appearance is more important than long-term outdoor color stability. Fluorescent film is not reflective sheeting. UV exposure accelerates fading; test adhesion, cutting and installation on your actual substrate.