• Lumina 2100 Dark Charcoal Metallic striping; representative full-width vinyl roll illustration. Supplied in the selected striping width and length.
  • Lumina 2100 Dark Charcoal Metallic material color reference; appearance varies with lighting and screen settings.
  • Example of custom-cut striping rolls on release liners; colors and dimensions vary with the selected option.
  • Lumina 2100 Dark Charcoal Metallic striping; illustrative architectural signage application, not an exact shade sample.
  • Lumina 2100 Dark Charcoal Metallic striping; illustrative window graphics application, not an exact shade sample.
  • Lumina 2100 Dark Charcoal Metallic striping; illustrative vehicle graphic application, not an exact shade sample.
Lumina 2100 Dark Charcoal Metallic striping; representative full-width vinyl roll illustration. Supplied in the selected striping width and length.
Lumina 2100 Dark Charcoal Metallic material color reference; appearance varies with lighting and screen settings.
Example of custom-cut striping rolls on release liners; colors and dimensions vary with the selected option.
Lumina 2100 Dark Charcoal Metallic striping; illustrative architectural signage application, not an exact shade sample.
Lumina 2100 Dark Charcoal Metallic striping; illustrative window graphics application, not an exact shade sample.
Lumina 2100 Dark Charcoal Metallic striping; illustrative vehicle graphic application, not an exact shade sample.

All striping rolls take approximately 10–14 days to arrive, including a 5–7-day processing time. These rolls are custom cut and NON-REFUNDABLE.

Lumina 2100 high performance striping in Dark Charcoal Metallic is a 2 mil cast PVC film for vehicle accents, architectural signs and long-term lettering. Order the pre-cut stripe width and roll length needed for your job. The flexible construction follows suitable curves, rivets and corrugations.

Features and benefits

  • Thin cast construction for conformable cut graphics.
  • Permanent acrylic adhesive for lasting installation.
  • Custom-cut roll widths simplify repeated stripes and borders.

Specifications

  • Series: Lumina by FDC 2100
  • Color: Dark Charcoal Metallic (431)
  • Film: 2 mil cast PVC
  • Finish: Gloss with metallic effect
  • Adhesive: permanent acrylic, clear
  • Liner: 78 lb
  • Outdoor durability: up to 6 years for metallic colors; actual service depends on color, exposure, installation and care
  • Minimum application temperature: 40°F
  • Environment: interior and exterior
  • Configuration: unpunched, custom-cut roll

Applications and compatibility

Use for sign borders, cut lettering, transportation graphics and decorative stripes on suitable substrates. This is adhesive sign vinyl, not heat-transfer material for clothing. Both electronic cutting and thermal-transfer or screen-printing processes are listed by FDC. Solvent, eco-solvent, latex and UV inkjet printing are not listed as compatible.

Choose your roll

Select the width and length from the Size menu. Ten yards equals 30 feet; 50 yards equals 150 feet. You receive the selected narrow roll, not a full-width master roll. Check your cutter's minimum media width and pinch-roller placement before feeding narrow stripes.

These rolls have no sprocket holes. Series 2200 is the separate punched configuration and is not interchangeable with unpunched friction-feed material.

Application and care

Clean and dry the compatible surface, remove contamination and test adhesion before completing the job. FDC permits wet application for this series; follow its installation instructions for the chosen surface. Keep the film and substrate within the specified application temperature. Use suitable application tape for cut graphics and allow for trimming and alignment. Clean installed graphics gently and avoid abrasive cleaners or concentrated pressure-washer jets at exposed edges.

Ordering and delivery

Allow approximately 10–14 days for arrival, including 5–7 days of processing. All striping rolls are custom cut and non-refundable. Confirm the color, roll size and surface compatibility before ordering.
🚚 $9.95 Flat Rate • FREE Ground Shipping $300+

FDC

Lumina 2100 High Performance Striping – Dark Charcoal Metallic

SKU 2100-1450-431
$19.95

All striping rolls take approximately 10–14 days to arrive, including a 5–7-day processing time. These rolls are custom cut and NON-REFUNDABLE.

Lumina 2100 high performance striping in Dark Charcoal Metallic is a 2 mil cast PVC film for vehicle accents, architectural signs and long-term lettering. Order the pre-cut stripe width and roll length needed for your job. The flexible construction follows suitable curves, rivets and corrugations.

Features and benefits

  • Thin cast construction for conformable cut graphics.
  • Permanent acrylic adhesive for lasting installation.
  • Custom-cut roll widths simplify repeated stripes and borders.

Specifications

  • Series: Lumina by FDC 2100
  • Color: Dark Charcoal Metallic (431)
  • Film: 2 mil cast PVC
  • Finish: Gloss with metallic effect
  • Adhesive: permanent acrylic, clear
  • Liner: 78 lb
  • Outdoor durability: up to 6 years for metallic colors; actual service depends on color, exposure, installation and care
  • Minimum application temperature: 40°F
  • Environment: interior and exterior
  • Configuration: unpunched, custom-cut roll

Applications and compatibility

Use for sign borders, cut lettering, transportation graphics and decorative stripes on suitable substrates. This is adhesive sign vinyl, not heat-transfer material for clothing. Both electronic cutting and thermal-transfer or screen-printing processes are listed by FDC. Solvent, eco-solvent, latex and UV inkjet printing are not listed as compatible.

Choose your roll

Select the width and length from the Size menu. Ten yards equals 30 feet; 50 yards equals 150 feet. You receive the selected narrow roll, not a full-width master roll. Check your cutter's minimum media width and pinch-roller placement before feeding narrow stripes.

These rolls have no sprocket holes. Series 2200 is the separate punched configuration and is not interchangeable with unpunched friction-feed material.

Application and care

Clean and dry the compatible surface, remove contamination and test adhesion before completing the job. FDC permits wet application for this series; follow its installation instructions for the chosen surface. Keep the film and substrate within the specified application temperature. Use suitable application tape for cut graphics and allow for trimming and alignment. Clean installed graphics gently and avoid abrasive cleaners or concentrated pressure-washer jets at exposed edges.

Ordering and delivery

Allow approximately 10–14 days for arrival, including 5–7 days of processing. All striping rolls are custom cut and non-refundable. Confirm the color, roll size and surface compatibility before ordering.
$19.95
Size:

Not all products are available for pickup at our Reno/Sparks warehouse. Please email us before placing your order to confirm local stock availability and pickup arrangements.
Lumina 2100 Dark Charcoal Metallic striping; representative full-width vinyl roll illustration. Supplied in the selected striping width and length. Lumina 2100 Dark Charcoal Metallic material color reference; appearance varies with lighting and screen settings. Example of custom-cut striping rolls on release liners; colors and dimensions vary with the selected option. Lumina 2100 Dark Charcoal Metallic striping; illustrative architectural signage application, not an exact shade sample. Lumina 2100 Dark Charcoal Metallic striping; illustrative window graphics application, not an exact shade sample. Lumina 2100 Dark Charcoal Metallic striping; illustrative vehicle graphic application, not an exact shade sample.
Lumina 2100 Dark Charcoal Metallic striping; representative full-width vinyl roll illustration. Supplied in the selected striping width and length. Lumina 2100 Dark Charcoal Metallic material color reference; appearance varies with lighting and screen settings. Example of custom-cut striping rolls on release liners; colors and dimensions vary with the selected option. Lumina 2100 Dark Charcoal Metallic striping; illustrative architectural signage application, not an exact shade sample. Lumina 2100 Dark Charcoal Metallic striping; illustrative window graphics application, not an exact shade sample. Lumina 2100 Dark Charcoal Metallic striping; illustrative vehicle graphic application, not an exact shade sample.

  • 🏆 Serving Since 1930

    Over 90 years of industry experience

  • 🚚 Free Shipping

    Free ground shipping on eligible orders $300+.

     Excludes 3M DI-NOC and freight items.

  • 📞 Expert Support

    Call Scott: 775-382-2290

  • 🔒 Secure Checkout

    Protected Shopify checkout

Frequently Bought Together

Total price$165.80

Product Description

All striping rolls take approximately 10–14 days to arrive, including a 5–7-day processing time. These rolls are custom cut and NON-REFUNDABLE.

Lumina 2100 high performance striping in Dark Charcoal Metallic is a 2 mil cast PVC film for vehicle accents, architectural signs and long-term lettering. Order the pre-cut stripe width and roll length needed for your job. The flexible construction follows suitable curves, rivets and corrugations.

Features and benefits

  • Thin cast construction for conformable cut graphics.
  • Permanent acrylic adhesive for lasting installation.
  • Custom-cut roll widths simplify repeated stripes and borders.

Specifications

  • Series: Lumina by FDC 2100
  • Color: Dark Charcoal Metallic (431)
  • Film: 2 mil cast PVC
  • Finish: Gloss with metallic effect
  • Adhesive: permanent acrylic, clear
  • Liner: 78 lb
  • Outdoor durability: up to 6 years for metallic colors; actual service depends on color, exposure, installation and care
  • Minimum application temperature: 40°F
  • Environment: interior and exterior
  • Configuration: unpunched, custom-cut roll

Applications and compatibility

Use for sign borders, cut lettering, transportation graphics and decorative stripes on suitable substrates. This is adhesive sign vinyl, not heat-transfer material for clothing. Both electronic cutting and thermal-transfer or screen-printing processes are listed by FDC. Solvent, eco-solvent, latex and UV inkjet printing are not listed as compatible.

Choose your roll

Select the width and length from the Size menu. Ten yards equals 30 feet; 50 yards equals 150 feet. You receive the selected narrow roll, not a full-width master roll. Check your cutter's minimum media width and pinch-roller placement before feeding narrow stripes.

These rolls have no sprocket holes. Series 2200 is the separate punched configuration and is not interchangeable with unpunched friction-feed material.

Application and care

Clean and dry the compatible surface, remove contamination and test adhesion before completing the job. FDC permits wet application for this series; follow its installation instructions for the chosen surface. Keep the film and substrate within the specified application temperature. Use suitable application tape for cut graphics and allow for trimming and alignment. Clean installed graphics gently and avoid abrasive cleaners or concentrated pressure-washer jets at exposed edges.

Ordering and delivery

Allow approximately 10–14 days for arrival, including 5–7 days of processing. All striping rolls are custom cut and non-refundable. Confirm the color, roll size and surface compatibility before ordering.

Similar Products

Customers also bought

    Complementary products