-
files/Batch36_Lumina_9106_005_royal_blue_color_reference_6ab04418-75d7-493a-9e82-c4e196dc0f97.jpg
-
files/Batch37_Lumina_9106_apparel_illustrative_AI_e5107319-5588-4409-8d98-19e1d560b4ea.png
-
files/Batch37_Lumina_9106_detail_illustrative_AI_fae5a2d6-579f-4fc6-84c2-a17848898809.png
-
files/Batch35_Lumina_shared_03_cutting_AI_f6438e8d-9174-4890-893a-34af232de601.png
-
files/Batch35_Lumina_shared_02_weeding_AI_4f9ef2ec-a587-495d-9423-d1fcaaf532fb.png
-
files/Batch35_Lumina_shared_04_carrier_peel_AI_3bbf9d58-6035-4901-aad0-55e173648c8e.png
Lumina 9106 Metal Flake Heat Transfer Vinyl in Royal Blue is a gloss PVC HTV with a metal-flake effect for decorative textile graphics. The special-effect surface adds visual dimension to cut names, lettering, and logos, with a pressure-sensitive PET carrier for positioning the weeded design.
Punched products require an additional 2 days of processing before shipment.
Key features and uses
- Metal-flake surface for special-effect garment graphics.
- Gloss finish with a nominal 4.3 mil film thickness.
- Available feed formats are identified on each roll variant.
Project ideas include custom shirts, decorative garment lettering, personalized logos, and special-effect apparel graphics. Use on 100% cotton, 100% polyester, cotton/polyester blends, and sublimated polyester. Check the garment label, coatings, and heat tolerance before decorating.
Product specifications
| Brand | Lumina by FDC |
|---|---|
| Series | 9106 |
| Color | Royal Blue (005) |
| Material | PVC |
| Finish | Gloss |
| Nominal film thickness | 4.3 mil |
| Compatible fabrics | 100% cotton, 100% polyester, cotton/polyester blends, and sublimated polyester |
| Adhesive | Clear, permanent, heat-activated |
| Carrier | Pressure-sensitive PET |
| Heat-press temperature | 320°F |
| Press time | 10 seconds |
| Pressure | Firm |
| Carrier peel | Cold |
| Layering | No |
Roll sizes and cutter compatibility
| Roll width | Feed type | Available lengths |
|---|---|---|
| 15 in | Unpunched | 5 yd (15 ft); 10 yd (30 ft); 25 yd (75 ft); 50 yd (150 ft) |
| 15 in | Punched | 5 yd (15 ft); 10 yd (30 ft); 25 yd (75 ft); 50 yd (150 ft) |
| 20 in | Unpunched | 5 yd (15 ft); 10 yd (30 ft); 25 yd (75 ft); 50 yd (150 ft) |
Each selected variant is one roll. Select the width, length, and feed type shown for this color. Roll width is not the same as usable cutting width. Check your cutter capacity before ordering.
Punched and unpunched rolls are not interchangeable. Punched material has sprocket holes for compatible pin-feed cutters. Unpunched material is intended for compatible friction-feed cutters.
Cutting and heat-press instructions
- Mirror the artwork and reverse-cut the film using settings tested for the material.
- Weed the unwanted film, leaving the design on its carrier.
- Preheat the garment for 5 seconds.
- Position the graphic and press at 320°F for 10 seconds with firm pressure.
- Peel the carrier after it has cooled.
These are the series product data bulletin settings. Test the complete process with your actual press, film, and garment before production.
Layering: No. FDC specifies that Metal Flake is not layerable. Plan a single-layer film design.
Care instructions
Turn decorated garments inside out. Machine wash cold with mild detergent. Do not bleach or dry clean. Dry at normal temperatures and follow the garment care label.
Common questions
Can Lumina 9106 be applied to sublimated polyester?
FDC lists sublimated polyester as compatible. Test the actual fabric for adhesion and dye migration before production. This compatibility does not establish a universal dye-blocking guarantee.
Is this printable HTV or adhesive sign vinyl?
No. This is colored cut film for heat application to compatible textiles. It is not printable media or pressure-sensitive sign vinyl.
What is included?
One roll in the selected configuration. Garment blanks, cutting equipment, and heat presses are sold separately.
- Regular price
- $32.95
Lumina 9106 Metal Flake Heat Transfer Vinyl in Royal Blue is a gloss PVC HTV with a metal-flake effect for decorative textile graphics. The special-effect surface adds visual dimension to cut names, lettering, and logos, with a pressure-sensitive PET carrier for positioning the weeded design.
Punched products require an additional 2 days of processing before shipment.
Key features and uses
- Metal-flake surface for special-effect garment graphics.
- Gloss finish with a nominal 4.3 mil film thickness.
- Available feed formats are identified on each roll variant.
Project ideas include custom shirts, decorative garment lettering, personalized logos, and special-effect apparel graphics. Use on 100% cotton, 100% polyester, cotton/polyester blends, and sublimated polyester. Check the garment label, coatings, and heat tolerance before decorating.
Product specifications
| Brand | Lumina by FDC |
|---|---|
| Series | 9106 |
| Color | Royal Blue (005) |
| Material | PVC |
| Finish | Gloss |
| Nominal film thickness | 4.3 mil |
| Compatible fabrics | 100% cotton, 100% polyester, cotton/polyester blends, and sublimated polyester |
| Adhesive | Clear, permanent, heat-activated |
| Carrier | Pressure-sensitive PET |
| Heat-press temperature | 320°F |
| Press time | 10 seconds |
| Pressure | Firm |
| Carrier peel | Cold |
| Layering | No |
Roll sizes and cutter compatibility
| Roll width | Feed type | Available lengths |
|---|---|---|
| 15 in | Unpunched | 5 yd (15 ft); 10 yd (30 ft); 25 yd (75 ft); 50 yd (150 ft) |
| 15 in | Punched | 5 yd (15 ft); 10 yd (30 ft); 25 yd (75 ft); 50 yd (150 ft) |
| 20 in | Unpunched | 5 yd (15 ft); 10 yd (30 ft); 25 yd (75 ft); 50 yd (150 ft) |
Each selected variant is one roll. Select the width, length, and feed type shown for this color. Roll width is not the same as usable cutting width. Check your cutter capacity before ordering.
Punched and unpunched rolls are not interchangeable. Punched material has sprocket holes for compatible pin-feed cutters. Unpunched material is intended for compatible friction-feed cutters.
Cutting and heat-press instructions
- Mirror the artwork and reverse-cut the film using settings tested for the material.
- Weed the unwanted film, leaving the design on its carrier.
- Preheat the garment for 5 seconds.
- Position the graphic and press at 320°F for 10 seconds with firm pressure.
- Peel the carrier after it has cooled.
These are the series product data bulletin settings. Test the complete process with your actual press, film, and garment before production.
Layering: No. FDC specifies that Metal Flake is not layerable. Plan a single-layer film design.
Care instructions
Turn decorated garments inside out. Machine wash cold with mild detergent. Do not bleach or dry clean. Dry at normal temperatures and follow the garment care label.
Common questions
Can Lumina 9106 be applied to sublimated polyester?
FDC lists sublimated polyester as compatible. Test the actual fabric for adhesion and dye migration before production. This compatibility does not establish a universal dye-blocking guarantee.
Is this printable HTV or adhesive sign vinyl?
No. This is colored cut film for heat application to compatible textiles. It is not printable media or pressure-sensitive sign vinyl.
What is included?
One roll in the selected configuration. Garment blanks, cutting equipment, and heat presses are sold separately.
- Regular price
- $32.95
Not all products are available for pickup at our Reno/Sparks warehouse. Please email us before placing your order to confirm local stock availability and pickup arrangements.
Frequently Bought Together
-
Vendor: Lumina
Lumina 9106 Metal Flake Heat Transfer Vinyl – Aquamarine
Regular price From $32.95 -
Vendor: Lumina
Lumina 9106 Metal Flake Heat Transfer Vinyl – Black
Regular price From $32.95 -
Vendor: Lumina
Lumina 9106 Metal Flake Heat Transfer Vinyl – Cherry Red
Regular price From $32.95 -
Vendor: Lumina
Lumina 9106 Metal Flake Heat Transfer Vinyl – Cracked Silver
Regular price From $32.95
Product Description
Lumina 9106 Metal Flake Heat Transfer Vinyl in Royal Blue is a gloss PVC HTV with a metal-flake effect for decorative textile graphics. The special-effect surface adds visual dimension to cut names, lettering, and logos, with a pressure-sensitive PET carrier for positioning the weeded design.
Punched products require an additional 2 days of processing before shipment.
Key features and uses
- Metal-flake surface for special-effect garment graphics.
- Gloss finish with a nominal 4.3 mil film thickness.
- Available feed formats are identified on each roll variant.
Project ideas include custom shirts, decorative garment lettering, personalized logos, and special-effect apparel graphics. Use on 100% cotton, 100% polyester, cotton/polyester blends, and sublimated polyester. Check the garment label, coatings, and heat tolerance before decorating.
Product specifications
| Brand | Lumina by FDC |
|---|---|
| Series | 9106 |
| Color | Royal Blue (005) |
| Material | PVC |
| Finish | Gloss |
| Nominal film thickness | 4.3 mil |
| Compatible fabrics | 100% cotton, 100% polyester, cotton/polyester blends, and sublimated polyester |
| Adhesive | Clear, permanent, heat-activated |
| Carrier | Pressure-sensitive PET |
| Heat-press temperature | 320°F |
| Press time | 10 seconds |
| Pressure | Firm |
| Carrier peel | Cold |
| Layering | No |
Roll sizes and cutter compatibility
| Roll width | Feed type | Available lengths |
|---|---|---|
| 15 in | Unpunched | 5 yd (15 ft); 10 yd (30 ft); 25 yd (75 ft); 50 yd (150 ft) |
| 15 in | Punched | 5 yd (15 ft); 10 yd (30 ft); 25 yd (75 ft); 50 yd (150 ft) |
| 20 in | Unpunched | 5 yd (15 ft); 10 yd (30 ft); 25 yd (75 ft); 50 yd (150 ft) |
Each selected variant is one roll. Select the width, length, and feed type shown for this color. Roll width is not the same as usable cutting width. Check your cutter capacity before ordering.
Punched and unpunched rolls are not interchangeable. Punched material has sprocket holes for compatible pin-feed cutters. Unpunched material is intended for compatible friction-feed cutters.
Cutting and heat-press instructions
- Mirror the artwork and reverse-cut the film using settings tested for the material.
- Weed the unwanted film, leaving the design on its carrier.
- Preheat the garment for 5 seconds.
- Position the graphic and press at 320°F for 10 seconds with firm pressure.
- Peel the carrier after it has cooled.
These are the series product data bulletin settings. Test the complete process with your actual press, film, and garment before production.
Layering: No. FDC specifies that Metal Flake is not layerable. Plan a single-layer film design.
Care instructions
Turn decorated garments inside out. Machine wash cold with mild detergent. Do not bleach or dry clean. Dry at normal temperatures and follow the garment care label.
Common questions
Can Lumina 9106 be applied to sublimated polyester?
FDC lists sublimated polyester as compatible. Test the actual fabric for adhesion and dye migration before production. This compatibility does not establish a universal dye-blocking guarantee.
Is this printable HTV or adhesive sign vinyl?
No. This is colored cut film for heat application to compatible textiles. It is not printable media or pressure-sensitive sign vinyl.
What is included?
One roll in the selected configuration. Garment blanks, cutting equipment, and heat presses are sold separately.
Similar Products
-
Vendor: Lumina
Lumina 9106 Metal Flake Heat Transfer Vinyl – Aquamarine
Regular price From $32.95 -
Vendor: Lumina
Lumina 9106 Metal Flake Heat Transfer Vinyl – Black
Regular price From $32.95 -
Vendor: Lumina
Lumina 9106 Metal Flake Heat Transfer Vinyl – Cherry Red
Regular price From $32.95 -
Vendor: Lumina
Lumina 9106 Metal Flake Heat Transfer Vinyl – Cracked Silver
Regular price From $32.95
