Lumina 9200 Flock Heat Transfer Vinyl in White is a nylon flock HTV with a soft, suede-like velour surface and a raised appearance. It creates dimensional cut lettering and decorative logos with an embroidered look using heat-applied film. A pressure-sensitive PET carrier holds the weeded graphic for placement.

Punched products require an additional 2 days of processing before shipment.

Key features and uses

  • Raised, suede-like texture for dimensional textile decoration.
  • Nominal 14 mil construction for a pronounced flock surface.
  • May be used as the top layer of a compatible layered graphic.

Project ideas include raised garment lettering, textured logos, personalized shirts, and decorative apparel graphics. Use on 100% cotton, 100% polyester, and cotton/polyester blends. Check the garment label, coatings, and heat tolerance before decorating.

Product specifications

Brand Lumina by FDC
Series 9200
Color White (002)
Material Nylon
Finish Textured Velour
Nominal film thickness 14 mil
Compatible fabrics 100% cotton, 100% polyester, and cotton/polyester blends
Adhesive Clear, permanent, heat-activated
Carrier Pressure-sensitive PET
Heat-press temperature 320°F
Press time 15 seconds
Pressure Medium
Carrier peel Cold
Layering Top layer only

Roll sizes and cutter compatibility

Roll width Feed type Available lengths
15 in Unpunched 5 yd (15 ft); 10 yd (30 ft); 25 yd (75 ft); 50 yd (150 ft)
15 in Punched 5 yd (15 ft); 10 yd (30 ft); 25 yd (75 ft); 50 yd (150 ft)

Each selected variant is one roll. Select the width, length, and feed type shown for this color. Roll width is not the same as usable cutting width. Check your cutter capacity before ordering.

Punched and unpunched rolls are not interchangeable. Punched material has sprocket holes for compatible pin-feed cutters. Unpunched material is intended for compatible friction-feed cutters.

Cutting and heat-press instructions

  1. Mirror the artwork and reverse-cut the film using settings tested for the material.
  2. Weed the unwanted film, leaving the design on its carrier.
  3. Preheat the garment for 5 seconds.
  4. Position the graphic and press at 320°F for 15 seconds with medium pressure.
  5. Peel the carrier after it has cooled.

These are the series product data bulletin settings. Test the complete process with your actual press, film, and garment before production.

Layering: Top layer only. FDC permits Flock as the uppermost film in a compatible layered design. Do not apply another film over its flock surface.

Care instructions

Turn decorated garments inside out. Machine wash cold with mild detergent. Do not bleach or dry clean. Dry at normal temperatures and follow the garment care label.

Common questions

Does the nylon construction mean it works on nylon garments?

No. Nylon describes the flock material construction. FDC lists cotton, polyester, and cotton/polyester blends as garment substrates. Do not assume compatibility with a nylon garment.

Is this printable HTV or adhesive sign vinyl?

No. This is colored cut film for heat application to compatible textiles. It is not printable media or pressure-sensitive sign vinyl.

What is included?

One roll in the selected configuration. Garment blanks, cutting equipment, and heat presses are sold separately.

🚚 $9.95 Flat Rate • FREE Ground Shipping $300+

Lumina

Lumina 9200 Flock Heat Transfer Vinyl – White

SKU 9200-1502-002
Regular price
$55.95

Lumina 9200 Flock Heat Transfer Vinyl in White is a nylon flock HTV with a soft, suede-like velour surface and a raised appearance. It creates dimensional cut lettering and decorative logos with an embroidered look using heat-applied film. A pressure-sensitive PET carrier holds the weeded graphic for placement.

Punched products require an additional 2 days of processing before shipment.

Key features and uses

  • Raised, suede-like texture for dimensional textile decoration.
  • Nominal 14 mil construction for a pronounced flock surface.
  • May be used as the top layer of a compatible layered graphic.

Project ideas include raised garment lettering, textured logos, personalized shirts, and decorative apparel graphics. Use on 100% cotton, 100% polyester, and cotton/polyester blends. Check the garment label, coatings, and heat tolerance before decorating.

Product specifications

Brand Lumina by FDC
Series 9200
Color White (002)
Material Nylon
Finish Textured Velour
Nominal film thickness 14 mil
Compatible fabrics 100% cotton, 100% polyester, and cotton/polyester blends
Adhesive Clear, permanent, heat-activated
Carrier Pressure-sensitive PET
Heat-press temperature 320°F
Press time 15 seconds
Pressure Medium
Carrier peel Cold
Layering Top layer only

Roll sizes and cutter compatibility

Roll width Feed type Available lengths
15 in Unpunched 5 yd (15 ft); 10 yd (30 ft); 25 yd (75 ft); 50 yd (150 ft)
15 in Punched 5 yd (15 ft); 10 yd (30 ft); 25 yd (75 ft); 50 yd (150 ft)

Each selected variant is one roll. Select the width, length, and feed type shown for this color. Roll width is not the same as usable cutting width. Check your cutter capacity before ordering.

Punched and unpunched rolls are not interchangeable. Punched material has sprocket holes for compatible pin-feed cutters. Unpunched material is intended for compatible friction-feed cutters.

Cutting and heat-press instructions

  1. Mirror the artwork and reverse-cut the film using settings tested for the material.
  2. Weed the unwanted film, leaving the design on its carrier.
  3. Preheat the garment for 5 seconds.
  4. Position the graphic and press at 320°F for 15 seconds with medium pressure.
  5. Peel the carrier after it has cooled.

These are the series product data bulletin settings. Test the complete process with your actual press, film, and garment before production.

Layering: Top layer only. FDC permits Flock as the uppermost film in a compatible layered design. Do not apply another film over its flock surface.

Care instructions

Turn decorated garments inside out. Machine wash cold with mild detergent. Do not bleach or dry clean. Dry at normal temperatures and follow the garment care label.

Common questions

Does the nylon construction mean it works on nylon garments?

No. Nylon describes the flock material construction. FDC lists cotton, polyester, and cotton/polyester blends as garment substrates. Do not assume compatibility with a nylon garment.

Is this printable HTV or adhesive sign vinyl?

No. This is colored cut film for heat application to compatible textiles. It is not printable media or pressure-sensitive sign vinyl.

What is included?

One roll in the selected configuration. Garment blanks, cutting equipment, and heat presses are sold separately.

Regular price
$55.95
Width:
Length:
Feed Type:

Not all products are available for pickup at our Reno/Sparks warehouse. Please email us before placing your order to confirm local stock availability and pickup arrangements.

  • 🏆 Serving Since 1930

    Over 90 years of industry experience

  • 🚚 Free Shipping

    Free ground shipping on eligible orders $300+.

     Excludes 3M DI-NOC and freight items.

  • 📞 Expert Support

    Call Scott: 775-382-2290

  • 🔒 Secure Checkout

    Protected Shopify checkout

Frequently Bought Together

Total price$279.75

Product Description

Lumina 9200 Flock Heat Transfer Vinyl in White is a nylon flock HTV with a soft, suede-like velour surface and a raised appearance. It creates dimensional cut lettering and decorative logos with an embroidered look using heat-applied film. A pressure-sensitive PET carrier holds the weeded graphic for placement.

Punched products require an additional 2 days of processing before shipment.

Key features and uses

  • Raised, suede-like texture for dimensional textile decoration.
  • Nominal 14 mil construction for a pronounced flock surface.
  • May be used as the top layer of a compatible layered graphic.

Project ideas include raised garment lettering, textured logos, personalized shirts, and decorative apparel graphics. Use on 100% cotton, 100% polyester, and cotton/polyester blends. Check the garment label, coatings, and heat tolerance before decorating.

Product specifications

Brand Lumina by FDC
Series 9200
Color White (002)
Material Nylon
Finish Textured Velour
Nominal film thickness 14 mil
Compatible fabrics 100% cotton, 100% polyester, and cotton/polyester blends
Adhesive Clear, permanent, heat-activated
Carrier Pressure-sensitive PET
Heat-press temperature 320°F
Press time 15 seconds
Pressure Medium
Carrier peel Cold
Layering Top layer only

Roll sizes and cutter compatibility

Roll width Feed type Available lengths
15 in Unpunched 5 yd (15 ft); 10 yd (30 ft); 25 yd (75 ft); 50 yd (150 ft)
15 in Punched 5 yd (15 ft); 10 yd (30 ft); 25 yd (75 ft); 50 yd (150 ft)

Each selected variant is one roll. Select the width, length, and feed type shown for this color. Roll width is not the same as usable cutting width. Check your cutter capacity before ordering.

Punched and unpunched rolls are not interchangeable. Punched material has sprocket holes for compatible pin-feed cutters. Unpunched material is intended for compatible friction-feed cutters.

Cutting and heat-press instructions

  1. Mirror the artwork and reverse-cut the film using settings tested for the material.
  2. Weed the unwanted film, leaving the design on its carrier.
  3. Preheat the garment for 5 seconds.
  4. Position the graphic and press at 320°F for 15 seconds with medium pressure.
  5. Peel the carrier after it has cooled.

These are the series product data bulletin settings. Test the complete process with your actual press, film, and garment before production.

Layering: Top layer only. FDC permits Flock as the uppermost film in a compatible layered design. Do not apply another film over its flock surface.

Care instructions

Turn decorated garments inside out. Machine wash cold with mild detergent. Do not bleach or dry clean. Dry at normal temperatures and follow the garment care label.

Common questions

Does the nylon construction mean it works on nylon garments?

No. Nylon describes the flock material construction. FDC lists cotton, polyester, and cotton/polyester blends as garment substrates. Do not assume compatibility with a nylon garment.

Is this printable HTV or adhesive sign vinyl?

No. This is colored cut film for heat application to compatible textiles. It is not printable media or pressure-sensitive sign vinyl.

What is included?

One roll in the selected configuration. Garment blanks, cutting equipment, and heat presses are sold separately.

Similar Products

Customers also bought

    Complementary products