All striping rolls take approximately 10–14 days to arrive, including a 5–7-day processing time. These rolls are custom cut and NON-REFUNDABLE.

Lumina 2409 utility-grade reflective striping in Red is a 5.9 mil retroreflective film for flat-surface vehicle markings, decorative borders and non-engineering-grade graphics. Choose the custom-cut roll width and length for your project.

Features and benefits

• Gloss reflective finish with clear permanent adhesive.
• Up to 5-year outdoor durability under suitable exposure conditions.
• Designed for compatible flat surfaces; not for rivets, corrugations or compound curves.

Specifications

• Series: Lumina by FDC 2409
• Color: Red (001)
• Construction: 5.9 mil retroreflective film
• Finish: Gloss
• Adhesive: Permanent / clear
• Liner: 90 lb layflat
• Outdoor durability: Up to 5 years
• Minimum application temperature: 55°F
• Environment: Interior and exterior
• Shelf life: 1 year under manufacturer storage conditions
• Configuration: Unpunched, custom-cut roll

Applications and compatibility

Use for utility-grade reflective stripes and commercial markings on suitable flat surfaces. This is not engineering-grade sheeting and must not be substituted where a traffic-control specification or certification is required.

FDC lists computer cutting, steel-rule cutting, thermal die cutting, flat-bed cutting and sheeting. Thermal-transfer and screen printing are listed; solvent, eco-solvent, latex and UV inkjet printing are not listed as compatible.

Choose your roll

Select Size from the menu. Ten yards equals 30 feet; 50 yards equals 150 feet. You receive the selected roll width, not a full-width master roll. Check your cutter’s minimum media width and pinch-roller placement before feeding narrow strips.

These rolls have no sprocket holes and are for compatible friction-feed equipment. Series 2459 is the separate punched configuration for sprocket/pin-feed equipment. Punched and unpunched material are not interchangeable.

Application and care

Use a dry application; wet application is not permitted. Clean and dry the compatible surface, test adhesion and follow the manufacturer installation instructions. Keep film and substrate at or above 55°F during application. Clean installed graphics gently and avoid abrasive cleaners and concentrated pressure-washer jets at the edges.

Ordering and delivery

Allow approximately 10–14 days for arrival, including 5–7 days of processing. All striping rolls are custom cut and non-refundable. Confirm the color, roll size and substrate compatibility before ordering.