Stahls Metallic Chrome
CAD-CUT® Metallic Heat Transfer Vinyl
Foil-Like Finish, Soft Feel
Add a higher-perceived value to designs with Metallic heat transfer vinyl. This one-step application gives the look of foil with an incredibly soft feel.
All roll widths are approximate.
Material Specifications
- Composition: Polyurethane
- Carrier: Pressure-Sensitive
- Thickness: 63 microns (.063 mm)
- Washability: 50
- Safety: CPSIA Certified
- Laser cutter compatible
- Important: Once handled or laundered, the material takes on a brushed metallic finish.
1-Color Application Instructions
Time: 8-10 seconds
Temperature: 285°F/140°C
Pressure: Medium
Peel: Cold
Hotronix® 360 IQ™ Hat Press
Time: 45 seconds
Upper: 280°F
Lower: 320°F
Pressure: Medium
Peel: Warm/Cold
Cover Sheet: 1/8" Foam Pad
Care Instructions
Machine wash cold, inside-out, using mild detergent on delicate setting.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Storage
Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.
Material/Fabric Compatibility
- 100% Cotton
- 100% Polyester
- Cotton/Poly Blends
