Stahl's SportFilm Lite

SportFilm Lite heat transfer material is thin yet durable, cuts and weeds easily, and is great for lightweight active garments.

All roll widths are approximate.

Cuts & weeds easily
Thin, flexible, & durable
Semi-matte finish
Not recommended for layered 2-color application

Material Specifications

Composition: Polyurethane (PU)
Carrier: Frosted, Pressure-Sensitive
Thickness: 100 microns/.10mm
Stretch & Rebound: 3
Washability: 50
Safety: CPSIA Certified
Laser cutter compatible

1-Color Application Instructions

Time:

10-12 seconds

Temperature:

302°F/150°C

Pressure:

Medium

Peel:

Warm

Sports Ball Heat Press Application Instructions

Time:

8 seconds

Temperature:

230°F/110°C

Pressure:

Firm (top platen should make contact with the ball 2 inches before final lockdown)

Peel:

Cool

Note: For textured balls, remove carrier and heat apply for an additional 8 seconds.

Care Instructions

Machine wash inside-out using mild detergent.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.

Storage

Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.

SportFilm Lite is not recommended for two-color application.

If you’re having issues with the film peeling up with the carrier when releasing, allow the design to cool a little longer. If you’ve already started to lift the edges, complete a repress.